Ever see your electricity bill and feel like your eyebrows are going to shoot up into your hairline? Maybe felt like those numbers were going to give you a mini heart attack? If this has happened suddenly, then it’s time for you to figure out just where the huge increase is coming from. More often than not it’s from the huge amount of electricity being spent on heating water. If this isn’t new and you have been paying huge bills for quite sometimes, then it’s time to look into the water heating costs as well.
Of course, now the target is to save up on your water heating bills. If that’s the aim then there’s plenty of ways you can reduce your water heating bills. Here’s how to get those bills down:
Don’t take long showers
Know that a lot of electricity saving depends on just changing your everyday habits. Many families prefer to take hot and long showers whereas many like taking baths. Not to mention that different people in those families must have different preferences too. But you would save a lot if you take small showers or take a bath. If not every day, then tries to do it sometimes for sure. This will bring down your bills a lot. After all, a long shower will use up a lot of hot water, but in a bath, the tub won’t have to be filled right to the very brim for you to wash. The water will stay still in one place and you can enjoy a long warm bath after a particularly tiresome day too. Water won’t flow out like in a shower and as such a huge amount of water will not be wasted. But for everyday use, you should stick to short, hot showers.
Lower your water heater’s temperature
Every 10ºF reduction in the temperature of your water heater will save you around 3% to 5% in your electricity or water heating bills. So if you do lower the temperature during summers or when it’s not that cold then you will certainly be saving a lot. It’s expected that you will want your bathing water to be really hot during the harsh winters. But this balancing during different seasons can lower your bills.
Don’t leave your tap open
This is something which you must be hearing since your kindergarten days and yet many people are still guilty of leaving their tap running. Whether it is for brushing your teeth, while doing laundry, or doing the dishes, people tend to keep their tap running. Those few extra seconds of leaving the water running accumulate to hours at the end of the year and increase your water bills. Additionally, many people tend to use warm water to do their daily toiletries, wash dishes, and do some of their laundries. This increases the water heating bills for sure. But the only way to decrease the bills is to cut back on the water heating costs. Here’s what you can do:
- Except for the clothes which have to be washed in warm water, use cold water to do your laundry and then to rinse.
- When using your dishwasher, wash full loads and wash for shorter cycles. If you can, wash some dishes with your hands to prevent dishwasher usage.
Fix all the leaks
Leaks can be very costly for you over time, especially if the leak is in your pipes or in the faucet itself. If it’s in the hot water tank then get ready to empty your pockets with the enormous bills. It’s said that little leaks can cost you around a dollar every month. This might seem like a little bit over time you will be wasting gallons of water per day, which will eventually translate to a huge bill at the end of the year or month. So one way to reduce your water bills is to simply fix your leaks. No matter how costly you might think fixing leaks will be, in the long run, you will be saving a lot.
Install fixtures which have low flow
Install faucets and shower heads, which have lower flow rates. These will be a little costly, but investment now will save you around 25% to 60% later on. Know that if you have older showerheads or faucets, then they will use a lot more water than new and modern ones. Doing an overall haul and installing newer fixtures will certainly ensure that your water bills go down more and your pockets empty less.
Install some heat traps on the water tank
Know that heat traps are loops or valves which are installed on the hot or cold water outlet or inlet pipes present on the water heater. These traps allow the cold water flow to go right into the tank but it doesn’t allow any unwanted convection and hot water flow out of your tank. With this, you could save a considerable sum on your monthly water heating bills. You might need a professional to install all of it on the existing water tank. But if you have a new heater, then these traps must come pre-installed.
Opt for insulating the hot water storing tank
This process will be different for different kinds of tanks. If you have an oil or natural gas water storing tank, then don’t cover the heater’s burner compartment, bottom, top, or thermostat. If you have electric tanks then just make sure to not cover up the thermostat. Moreover, always consult the manufacturer’s guide before installing it. But this is how you should generally insulate the hot water tank:
- First, opt for insulating just some feet of both the cold and hot water pipes which are connected right to the tank for heating water.
- Then install a good timer which will turn off the heater at times or night when it won’t be in use. Moreover, you could also set the timer so that it turns the heater off when there’s peak demand.
Get a new water heater
If you use an old water heater, then that might be the reason why your water heating bills are so huge. Old heaters are not able to save water and they use a lot of electricity to heat water. So, don’t limit your use to just the conventional water heaters. There are far more modern and efficient water heaters available. These will help you save more on your electricity as well as water bills.
Drain your tank
Practice draining your heater per year. Draining your tank will help you get rid of the sediments which can restrict heat transfer and lower the overall efficiency of your water heater tank. Draining your water heater won’t take too much time or effort. The whole procedure is pretty easy, but it’s advisable that you still follow the directions given the manufacturer in the instructions manual. If you aren’t sure of the procedure, then just call in a professional to help you out.
Replace the old appliances
Old appliances like washing machines and dishwashers which are ten or more years old use more energy and wastewater more. To avoid high bills, you should consider replacing them with a newer and more efficient model. If you don’t have the financial condition to replace it all at once, then try to replace it one by one. There are many offers on the market where you can get newer models just by giving off your old appliances. Look into those deals as well.
When should you replace your water heater?
This is a question which many tend to ask. But you will see the signs of old age and maximum usage in your heater. It will start to malfunction, your bills will skyrocket and you will have to begin repairing it more than the usual once in a year visit. When that begins to happen, you should try to look into possible new replacements which will be an up-gradation over your old model. Try to look into other options like tankless water heaters which take up less space and will reduce your bills too. A good and considerate choice will be more beneficial for you and last long. this buying guide help you to pickbest tankless water heater for your house.
Overall, all these methods and ways will certainly help you save a lot when it comes to your water heater bills. But if you can’t follow them all then try to follow three rules at the very least ensure that there are no leaks in the water heating system, insulate your pipes and use cold water or lukewarm water whenever possible. Of course, you will need warm water to bath during winters, if you wake up early or if you live in a cold region. In such cases try to reduce warm water use in other areas like while washing dishes, clothes, floors and such. Know that if you cut usage in one place and fix all leakages then the bill will come down.